CONTA-CLIP Novelties

Our product range: CONTA-CONNECT for terminal blocks and accessories, KDS cable management systems, CONTA-ELECTRONICS for electrical and electronic switchgear cabinet components, CONTA-LABEL for marking systems, CONTA-BOX for housings, and CONTA-CON for PCB terminal blocks and connectors. We design customer-specific solutions for electronics, provide completely assembled housings and assemblies as needed, assemble terminal blocks for series production, and quickly handle component labelling tasks.

 

News

Seals KDS-DES

The KDS-DES sealing elements offer the possibility of installing non-assembled cables. Despite the high packing density (up to 8 lines), the KDS-DES sealing elements are compatible with almost all KDS solutions.

Cable entries KES-E

With the cable entry system KES-E many cables (without connector plugs) with different diameters from 1 mm to 16.1 mm can be inserted on a confined space. The cable entry system can be inserted into the provided opening without tools (wall thicknesses of 1.5 mm – 2.5 mm). In order to insert cables the membrane (with marked centring point) must be pierced, now the cables can be easily guided through. The TPE material ensures IP64 tightness.

Data sheet (PDF)

 

Schraubanschluss-System | Teilkatalog 02

Terminal blocks with screw connections and special terminalsEverything for classic wiring with screw connection systems (also for high cur-rents): SRK feed-through and PE terminals, RK high-temperature variants, TK transformer terminals, HSK high-power stud terminals, SVB series screw distribu-tor blocks, and the modular feed-through terminal systems from the SDK series.

Cataloge 02 (PDF)

 

KDS-BP

The KDS-BP blank plates offer an easy way to safely close existing cut-outs from the KDS or KES system. The version, made of glass fibre reinforced PA 6.6 material offers a high impact resistance. The moulded-in gasket  made of TPE ensures a reliable seal conform IP66.

KDS-VS

KDS/KES-VS blank plugs offer the possibility to close unused holes in the KDS sealing elements, or to close already pierced KES inserts. The geometry of the head prevents the ingress of spray water or dust from the outside and ensures protection degree IP66.

Cable Entry System KDS-R

For metric break-outs from M20 to M63, CONTA-CLIP has added round cable entries for cables with or without attached plugs to its portfolio.

 Product Information (PDF)

 

Push-in connection system | Catalog 01

Our wide range of innovative PRK and FRK terminal blocks with the Push-in connection system include feed-through terminals, PE terminals, disconnect terminals, fused terminals, multi-level terminals, installation terminals and initiator terminals, for conductor cross-sections from 0.2 mm² to 25 mm².

Catalog 01 (PDF)

 

KDSClick service box

The KDSClick service box is perfect for installation or maintenance jobs, but also with new developments it could be very useful to have a box with a wide variety of seals and inlays available within reach. 

Data sheet (PDF)

 

Terminal blocks with tension-spring connection | Catalog 03

Our versatile line of terminals with tension spring connections for conductor cross-sections from 0.2 mm² to 16 mm² includes: the ZRK/ZSL series of feedthrough and PE terminals, the double-level ZRKD/ZSLD, the ZIKD three-level termina lblocks, motor-connection terminals, (blade-) disconnect terminals, fused terminals, direct-mount terminals, and initiator/actuator terminals for transmitting positioning, encoder and alert signals.

Catalog 03 (PDF)

 

Motor-connection terminals PVMAK

The PVMAK 2.5 has a width of only 5 mm. It has four levels with seven connection points and can handle solid or stranded wires up to 2.5 mm² with a rated current up to 22  amps.

Online catalog (PVMAK)

 

Technical Support

© CONTA-CLIP, Inc.
400 Apgar Drive. Suite D
Somerset, NJ 08873

Phone No. 732-564-0705
Fax No. 732-564-0706

Contact formular